1.MOUNT THE BRACKETS
If the clutch is on the right end of the shade, attach the brackets to
the window frame, window molding, wall or ceiling, as shown below.
If the clutch is on the left end of the shade, reverse the bracket
positions, left for right.
2.INSTALL THE SHADE
a.Push the clutch straight onto the blade of its bracket.
The bottom of the clutch should always point straight down.
b.Lower the LUG of the end plug onto the"V" of its bracket.
The roller should fit in the brackets securely, with just a little play.
3.USE THE CONTROL CORD TO OPERATE THE SHADE.
Pulling gently on the cord in one direction raises the shade, pulling
it in the other direction lowers it.
On shades where the fabric rolls against the window, the front cord
does the raising.
On shades where the fabric rolls toward the room, the rear cord does
the raising.
4.ATTACH STOPS TO A CONTROL CORD THAT'S MADE OF BEAD
CHAIN.
On metal bead chain, attach a metal stop ball that is at least 5/16"
in diameter, so that it touches the mouth of the clutch when the shade
is in the rolled up position.
For metal or plastic bead chain, lower the shade to sill or floor height,
and attach the appropriate metal stop or plastic connector next to the
clutch, this prevents the shade from being lowered beyond that point.
