About Our New Cordless Roller Systems
for Customer’s Fabric Shades or Romanzia In-House Fabric Shades.
The ideal solution for child safety concerns. To lower the shade, pull the hembar down to the place you want it to stop and let go. To raise the shade, pull the hembar down about an inch and release - the shade will glide slowly up to its preset upper limit. Available with or without Cassette Systems or Shade Topper Valances.
Standard Features
- Shades are pre-mounted on a headrail or in a cassette system. Headrail or cassetes are them mounted using snap-on brackets.
- Tension and Stops are pre-set at the factory but can be easily adjusted on site. Available with either side or front tension and stop adjustments.
- Choice of Regular or Reverse Roll shades. These terms describe how a shade’s cloth rolls off the top of the roller. The cloth rolls off the back of a regular roll shade. The cloth rolls off the front of a reverse roll shade. Regular roll will be furnished unless reverse roll is specified.
- Turned bottom hem with enclosed weight.
- Minimum Width - The minimum width for a cordless roller shade is 29-1/2” bracket to bracket.
- Maximum Width - The maximum width for in-house fabric cordless roller shades is 96”; customer’s fabric shades are limited to the width of the customer’s fabric - up to 60”.
- Choice of Standard Pull:
External Aluminum Hembar Option. Extruded aluminum with a White, Vanilla, Bronze, Black, or Silver Gray finish. Add $7 per foot of shade width.
